top of page
Waterbased Varnish Flat - 16oz
  • Description

    Varnishing hardwood floors is a project that cannot be taken lightly but with the appropriate and effective finishing products for wood, you will enjoy it much longer. SamaN’s water-based varnish is twice as resistant as a traditional one and dries quickly into a beautiful, clear and high-quality finish.

    Available in satin, semi-gloss, gloss and matte finish, its self-leveling and anti-UV formula offers more than long-lasting results. Our wood varnish is also perfect for your office furnishings you’ve been wanting to finish for 2 years, your kitchen cabinets or moldingsneeding a little love.

    Covering power: A 946 ml (1L) container covers approximatively 150 sq. ft.


    Before you begin:

    Make sure the product is at room temperature. Stir the varnish with a stick so that the matter at the bottom of the container peels off and blends perfectly with the mixture before starting.

    Surface preparation:

    Bare wood: Sand with a 120 or 150 grit sandpaper. Do not use steel wool. Vacuum the dust and wipe it off with a clean, dry cloth.
    Varnished wood: The surface must be dry, clean and free of dust, mold, wax, grease and moisture. Wash the surface with SamaN’s TSPeco and lightly sand with a 150 grit sandpaper.
    Stained wood: Ensure that the surface is completely dry before applying the product. This will prevent the pigments of the stain from rising up into the varnish and givie an uneven finish.


  • Apply 2 to 3 coats of SamaN’s water-based varnish following the direction of the wood grain with a good quality brush, an 8 mm lint-free roller or an HVLP paint gun.
  • Sand between coats with a 180 grit sandpaper.
  • Vacuum sandblasting dust and wipe off with a clean, damp cloth to remove any residue.
  • Repeat this process between each coat of varnish to be applied.
  • Let it dry for 1 to 2 hours between coats.
  • Wait 24 hours before allowing light traffic.
  • Wait one week for heavier traffic or to lay your rug.
  • Cleaning tools:

    Clean all tools and equipment with hot water and soft soap immediately after use.

    Drying time:

Waterbased Varnish Flat - 16oz

Out of Stock

    thank you for shopping with us!

    bottom of page